Automotive Electrical & Electronics
Tejays 4WD can do anything from:
Changing light globes and LED replacement globes
Driving lights, Bar lights, Rock lights etc.
Dual Battery systems
Anything else electrical for your RV or 4WD Camper Trailer or Caravan
Solar Charge Kits
Mobile Solar
We can help you!
Do you want REAL performance when it comes to driving lights?
-
FYRLYT MOFO 12000
It is always hard to get good photos for comparison when it comes to lighting and that is why we have all 3 models of FYRLYTs on 3 vehicles to demonstrate them to you.
This photo was taken somewhere in the mountains between Stewarts Brook and Upper Rouchel Brook.
-
Fitted pair of MOFO 12000
The FYRLYT’s come in 3 models with the base light that is the same. Spare parts are available for them, such as new lenses and reflectors if a rock goes through them.
We stock the MOFO 12000 and Luxus 5000 (RRP $990 and $660 respectively per pair).
We do also have wiring harnesses on hand for them.
Don't want to change your lights or like the ones you have but sick of blowing globes? Why not try these LED replacement globes. We also have T5, T16, and T20 Wedge type and festoon in stock.
Want to upgrade to LED lights or do your old ones need replacing? We keep a basic variety LED lights in stock, or we can get most brands and series LED lights.
We keep the Redarc Tow pro elite electric brake controllers in stock, along with inserts to fit the existing holes in your dash board and spare parts. This brand seems to be the pick of them by our customers.
Trailer Vision's Andersen plug covers. We keep the 50A ones in stock and can order in covers for the other sizes. They come in Black, Blue, Red and Yellow and even a combinations of 7 pin trailer and andersen plug!. We do also keep the 50A Andersen plugs, grey, red, blue, and yellow ones, along with 7 and 12 pin trailer sockets and plugs in stock.
Need some cable? We have a reasonable range of cable in stock and can sell it by the metre or by the roll. 4mm and 6mm twin solar cable, 2mm, 3mm, 4mm, 6mm, and 8mm twin sheathed power cable, 6 and 0 gauge battery cable, 5 core 2.5mm and 7 core 4mm Cable. Also with a wide range of lugs we can custom make any lead you need.
We do have a selection of automotive electrical products and hardware that we keep in stock to use ourselves, VSR's, contactors, OEM Switches, power sockets, and quality 40a and 80a rated wiring harnesses for driving lights. We have a selection of deutsch and QC plugs, stainless steel nuts and bolts, etc.
Wide variety of workshop consumables - always needed in ones' workshop!
After something else? We stock oils, paints, and cleaning products - this is what we use. We are happy to carry other commonly used brands too!
New products | Solar Charge Kits
Do you have a vehicle that doesn’t get used a lot, is parked up for a period of time or have machinery that doesn’t get used all the time? Are you sick of batteries being flat in these situations? Why not buy one of these solar charge kits and take advantage of the energy from the sun?
These kits come with everything you need to install them with the tools most people would already have. Alternatively you can get us to install them.
Kits start at $629. They have a 130w Solar panel and regulator that can charge 2 batteries at the same time. We offer different options that would suit most, if not we can always customise one for your particular requirements.
-
The base kit comes with 1 x 5m solar cable, 2 x 5m charge cables and 2 x battery adapter leads, with the option of 10m and 15m leads for both solar and charge cables.
-
Options Available:
-10m and 15m charge cable kits
-Hardware for Steel or Timber
-Extra or longer adapter leads -
-We can make the leads to your specifications.
- We can supply any extra different hardware to suit your needs. -
These kits will be in stock by the end of August. If you are interested why not get in contact with us now to preorder your kit. At this stage they are pickup only in Scone NSW, while we look into being able to get them sent to you.
If we are out of stock of the kits, we can usually have the parts here withing a few days.
Mobile Solar
Here are photos of what I have done to my own vehicle. It is based on a 1985 Land Rover V8 County. This vehicle came out of the factory in England with the Rover V8 in it. I do have 3 x engineers reports for the vehicle because of the modifications done to it. It is a project in motion. While doing all the work the vehicle has been kept on the road at the same times as completing jobs for the business. It is an ongoing project which may never be finished as new ideas and better ways of doing things keep occurring. No matter what vehicle you own, I am sure you can appreciate the work that I have done and the care I will take with you vehicle.
170w Solar panel on the roof of the cab. I can take the box body off the back and put the tray on it when needed, but I don't loose the ability to charge the 2nd battery and can still run a fridge etc.
Needing more solar while camping, I have only recently added this 185w thin solar panel to the RHS door of the box body it is only 2mm thick and it was attached using roof and gutter silicon and glued it in place.
The next job is to fit 2 of these 10w panels on the roof of the cab to trickle charge the starting battery. The starting battery on my truck only runs the engine, the head lights and the driving lights on the bull bar. Everything else runs off the 2nd.
20a DC-DC Charger, Low voltage disconnect, charge points, light switches and a couple of ammeters just to keep an eye on things.
2000w Pure sine wave inverter which is good enough to run a drill or angle grinder.
I had this bar fridge that was not doing anything, so I put it in and it runs off the inverter. Not the most efficient way of keeping things cool but will do until the next upgrade!
It is always hard to keep a battery box, as busy as this one neat and tidy. Check out the Fullriver Battery, HC100. N70 size AGM battery, 105AHr and 965CCA! Runs my Thomas 12v Winch very well.
This end of the battery box is a little more challenging. Notice the little black box cable tied to the wires? It is a wires voltage sensor for a hummingbird volt meter.
Here is the Hummingbird Volt meter paired up to 3 sensors. My truck itself has 2 batteries but there are also 3 x 100AHr AGM deep cycle batteries in the box body. I also run 2 x 85a alternators to keep up with it.
Avionics Electrical Work
The Avionics rack, which includes the radios. Yes that is a GME UHF CB in the bottom of the rack, and yes it is integrated into the plane's audio system!
Anyone who has ever attempted to wire up anything will appreciated the time taken and the patience required to complete a job like this.
The rear cock pit with an added audio panel and Simoco control head. These Simoco radios can have 2 radios with 1 control head, saving critical space. They also have 2 control head so the co-pilot can select channels etc. The 2nd Audio panel allows the co-pilot to select any of the plane's radios independently of the pilot. The first time it has been done that we know of! It even has a Bury Bluetooth phone kit integrated into the audio system.
This is the biggest box we could find to fit this space. These radio boxes are designed to be easily removed from the plane when radios need changing, when different channels are needed or for repairs when something ultimately fails.
Self contained: All the radio circuit breakers easily accessible by the Co-Pilot, Power and Double USB Sockets as they also use tablets for navigation and anything else to be able to charge them up. PTT button and headphone jacks.
All the connections on one end for easy accessibility to be able to remove the radio box in a timely and easy manner when needed. There is nothing worse than something failing during an emergency and have something hard to fix.